ConnectPRO HDMI DDC/EDID Emulation

The ConnectPRO DDC EDID Ghosting Emulator is designed to solve the problem that computers can sometimes lose the Extended Display Identification Data (EDID). The DDC EDID data is vital for the video extension; it is a data structure provided by a computer display to describe its characteristics to a graphics card. However, when you switch or disconnect and then reconnect the displays such as the monitor, you may lose DDC EDID communication, and the user's computer then fails to display the image properly if at all.

Now, such is no longer the case if you use ConnectPRO's DVI DDC EDID Emulator module. The ConnectPRO DDC EDID Emulator allows the user to have best video image setting all the time. Through an easy programmed process, the display's DDC EDID is memorized in the DDC module, thus preventing our customers from blank screens and boot problems as well as resolving the issue of display resolution and color due to a lack of DDC EDID information.

Features & Benefits

Store EDID information for HDMI display with full EDID Cloning of existing display.
True DDC emulation
- Support dual page DDC for compatible resolutions
Supplies standard EDID information when no cloned information is available
Installs in seconds
- Easy and Compact design for installation and operation
Interface Powered by HDMI connector or optionally externally supplied by USB connector or 5V power supply
Multiple options for providing external power when necessary
USB pass-through port means no USB port is wasted when using USB power option. Connect USB devices to USB A port and use them as if directly connected to computer.
Multiple kits available for various accessories and power options (HDMI cable, USB cable, Power supply)

Functional
Power supply	If required, USB or 5V DC adaptor
Power LED / Default EDID	Green
Clone EDID	Push button switch
Clone indication	Change to Orange color
Resolution	Up to 1920 x 1200@60 Hz Up to 3840 x 2400 (with Dual-Link)
Connectors	HDMI Female x 2
Video Input Definition
A/D	Digital Signal (HDMI)
Video level	0.700, 0.000 ( 0.700 Vp-p )
Sync. support	Separate
Establishing and Standard Timing
Establishing timing I	0 to 60 degrees C
Establishing timing Ii	-30 to 70 degrees C
Standard timing identification	0~80% RH, NC
Mechanical
Height	22 mm ( 0.87 inch )
Width	45 mm ( 1.77 inch )
Depth	70 mm ( 2.76 inch )
Weight	70 g ( 0.15 lb )
Certification
	FCC, CE

Supported Resolutions on Default Table
The preferred method is for the customer to clone the specific monitor that is to be used, but when that is not an option the customer can use the standard table built into the Ghost Emulator (the Green light setting).
Standard Table	720 x 400p at 70Hz - IBM VGA 640 x 480p at 60Hz - IBM VGA 640 x 480p at 67Hz - Apple Mac II 640 x 480p at 72Hz - VESA 640 x 480p at 75Hz - VESA 800 x 600p at 56Hz - VESA 800 x 600p at 60Hz - VESA 800 x 600p at 72Hz - VESA 800 x 600p at 75Hz - VESA 832 x 624p at 75Hz - Apple Mac II 1024 x 768p at 60Hz - VESA 1024 x 768p at 70Hz - VESA 1024 x 768p at 75Hz - VESA 1280 x 1024p at 75Hz - VESA 1152 x 870p at 75Hz - Apple Mac II 1920 x 1080p at 60Hz - VESA STD 1680 x 1050p at 60Hz - VESA STD 1600 x 1200p at 60Hz - VESA STD 1440 x 900p at 60Hz - VESA STD 1400 x 1050p at 60Hz - VESA STD 1280 x 1024p at 60Hz - VESA STD 1280 x 960p at 60Hz - VESA STD 1152 x 864p at 75Hz - VESA STD

HDMI DDC-EDID Emulator

Front		Back

Front		Back
Download Installation Guide (pdf)

Using with a KVM Switch

** ConnectPRO's current selection of UR and PR KVM switches has built-in All-time Full DDC support, making a ghosting emulator unneccessary.

Using with a KVM or Video Extender

** ConnectPRO's EOC-VA1 audio/video extender over Cat5 has built-in All-time Full DDC support, making a ghosting emulator unneccessary.

What's Included

	HDMI-EDID UPC: xxxxxxxxxxxxx	HDMI-EDID-KITU UPC: xxxxxxxxxxxxx	HDMI-EDID-KITU1 UPC: xxxxxxxxxxxxx
HDMI-EDID
1 ft. M/M HDMI Cable
USB cable for power
Power Supply